What Is a Rotary Beverage Filling Machine and How Does It Work?
What is a rotary beverage filling machine and how does it work? When you want to build a beverage production line, you will meet this question. Then let us discuss about it:
1.The rotary beverage filling machine can fill the beverage in the containers, bottle or can.
In the beverage production process, the key process is filling the beverage into the bottle or can, then sealing it. In industrial production, the filling machine is necessary. In the kinds of filling machine, the rotary beverage filling machine is most popular filling machine. it accounted for a 90% share. Up to the kinds of beverage, the rotary beverage filling machine are different. There are rotary water filling machine, rotary carbonated soft drink filling machine, rotary juice filling machine and so on. Up to the kinds of container, there are PET bottle rotary beverage filling machine, glass bottle filling machine, can filling machine and so on.
2. The rotary beverage filling machine appear as washing filling and capping 3 in 1 monobloc.
Yes, most time the engineer combine the three parts , washing bottle machine, filling beverage machine and capping machine, together to work. When the conveyer system send the bottle into the machine, the first dial will get the bottle and transfer the bottle to the washing machine. the washing machine bottle clamp will clamp the bottle and turn over the bottle. At the same time, the spray nozzle will spray water to clean the bottle inside. After spraying water, the washing machine will drain the bottle dry.
Then turn back the bottle, the second dial will transfer the bottle to the filling machine. the filling machine bottle support will take the bottle. Then it will lift the bottle mouth to touch the filling valve. After touching filling valve, the bottle support go up again to lift the bottle mouth open the valve. This time the filling valve start to filling beverage into bottle.
The filling machine turn forward, the valve will close. Then the third dial will take the bottle and transfer it to the capping machine. when the capping machine take the bottle, the capping head will take the cap also above the bottle mouth. The capping machine turn again, the capping head will put the cap on the bottle mouth and turn it. Finally the fourth dial will transfer the bottle to the belt conveyor.
3. How does the material enter the filling machine.
The beverage enter the filling tank through pipe. The pump transfer the beverage into the pipe from storage tank. The bottle enter the filling machine through air conveyor (PET bottle). And the bottle exit the filling machine to belt conveyor. The cap enter the filling machine through cap loader. Then the waste water go out from the drain pipe.
That is the simple introduction to the rotary beverage filling machine. If you have other questions, you can let us know, we will try our best to help you!
