Understanding CIP Systems in Beverage Production
Understanding CIP systems in beverage production, if you want to produce beverage, it is better to know more about the CIP systems:
1. What is CIP systems.
CIP system, full name is clean in place system, is a beverage production machine cleaning system. It can clean the pipe, filter, tank and all place contacted with beverage. Normally it have three tanks, one or two pumps, heating system and control system. The three tank is for storing the cleaning liquid, the cleaning liquid will be hot water, 2% alkali solution and 2% acid solution. The pump will transport the cleaning liquid. The heating system will heat the cleaning liquid to 60-70℃ temperature, at the temperature the cleaning effect is the best. The heating system use steam heating, also can use electricity heating. When using steam for heating, most time will use heat exchanger for heating the cleaning liquid,
2. How does the CIP system work?
The CIP system can clean the machine before and after beverage production. The CIP system will use hot water, alkali solution, acid solution to clean the machine. Before cleaning the machine, the CIP will heat the clean liquid. The CIP system pump will transfer the clean liquid to the pipe and tank, then recycle them to CIP system. The tank and machine install spraying ball, the clean liquid will wash the machine and tank inside with pressure. Then the cleaning liquid will go back through the pipe! Through the long time cleaning, the tank and pipe will be very clean.
3. What effect does the CIP system can make?
The CIP system can clean the machine, remove the residue. So it can avoid the bacterial proliferation. And when you change the taste of the beverage, the CIP system can avoid the effect of different beverage production. Totally, the CIP system is the key machine for beverage productions.
This is the simple introduction for CIP system, if you have other questions, you can let us know!






















