Water Bottle Filling Machine

Usage:

The water bottle filling machine is used for filling water in to the PET bottle or glass bottle.

In one machine, it can finish washing bottle, filling water and screwing cap three job. And it is the key machine of mineral water bottling plant.

Main parameters:

Production capacity: 2000-24000 bottle per hour

Bottle size: 500ml-2000ml

Machine details drawing:

Feature:

1.The machine adopt air conveyor system with high efficient blower to feed bottle. So it can guarantee the high speed feeding bottle.

2.The machine is with bottle neck holding in the whole course. So it can protect bottle well.

3.All the parts contacting with water use SUS304 material. So it is very easy to clean.

4.The gripper use stainless steel. And the position where hold the bottle neck use stainless steel. So the screw parts can avoid pollution well.

5.The machine adopte famous brand anti-corrosion non-maintaining bearing. So it can reduce the pollution of filling to the environment.

6.The rotate plate use SUS304, and it use large flat toothed bearing.

7.The valve use the advanced foreign design with a fast filling speed, no hygiene corner pocket, a few sealing parts, and precise liquid level control. And the whole valve use food grade stainless steel.

8.The filling valve opens and begins filling when the bottle moves up in support bottle neck plate. Then the bottle move down and leave the filling valve after it finishes filling.

9.Our experts improve the design of magnetic steel for the screwing capping head, so the capping head can reduce the defective rate of capping. And it is easy to set and adjust the torque.

10.The screwing capping head is dual-purpose design, so it is suitable for flat cap and sport cap also.

11.The anti-reverse-cap device can take out the reverse cap, and prevent the reverse cap passing in the cap-falling guide.